Bachmann Europe plc

Model • Collect • Create

Class 24/1 D5053 BR Two-Tone Green (Small Yellow Panels)
372-979A

Class 24/1 D5053 BR Two-Tone Green (Small Yellow Panels)

£139.95


Product Number:

372-979A

Scale/Gauge:

N

Era:

5 and 6

Availability:

Awaiting


History

 

The widely travelled British Railways Class 24 diesel locomotives, also known as the Sulzer Type 2, were built from 1958 to 1961. One hundred and fifty-one were built at Derby, Crewe and Darlington, the first twenty of them as part of the British Railways 1955 Modernisation Plan. This class was used as the basis for the development of the class 25 locomotives.  The final survivor, no. 24081, was withdrawn from Crewe depot in 1980.  Four class members are preserved.

 

Initial deliveries were for operation in the Crewe and Derby areas, but fifteen of the initial twenty were diverted for use on the Southern Region to cover for delays in the Kent Coast Electrification scheme. 

 

As deliveries continued allocations were made to both the London Midland Region and Eastern Region, and with the class becoming familiar to crews and staff around London they were used on freight trains over the Metropolitan Widened Lines. Locos allocated to East Anglia for use on freight soon became redundant due to the rundown of freight in that region, and these were, in turn, moved to Wales and Lancashire.

 

Class 24s took over the 'Condor' fast freight service between London (Hendon) and Glasgow (Gushetfaulds) in 1961. Thus the class was also used when a second "Condor" fast overnight freight service was introduced, running from Aston to Glasgow. These were the usual motive power from its introduction on 17 January 1963 when D5082 hauled the Down train and D5083 the up train until replaced by the first Freightliner service in 1965.

 

The batch D5096–D5113 were all allocated to Gateshead depot in 1966 to replace 9F steam locos on the Tyne Dock to Consett iron ore trains. These workings used a special design of bogie hopper wagon, and these locos had an additional compressor and associated pipework. These workings, typically with loads of around 1,000 tons, were double-headed and continued until taken over by Class 37s in the 1970s, when these locos were reallocated to Scottish depots.

No documents available.

You might be also interested in the following items:

Customers who viewed this item also viewed:

KEY: DS or SF suffix = DCC Sound Factory Fitted | DC suffix = DCC Decoder Factory Fitted | [W] suffix = Weathered finish | [PF] suffix = Passenger Figures Fitted | [L] suffix = Supplied with a Wagon Load

ETA : This indicates the release of the product to our network of Retailers and is subject to change without notice. E&OE. 
Bachmann do not sell direct to the public, please contact our Stockists to purchase the products we distribute.