Brassworks Body Removal Instructions
Location of Branchline Locomotive Bodyshell Securing Screws
Screw at each end of baseplate
31-100 Cl4 4-6-0
31-150 Jubilee
31-200 Patriot
31-225 Royal Scot
31-275 Royal Scot
31-300 Manor
31-800 Mogul
32-000 Hall
32-025 Class 20
32-150 N class
32-275 K3
32-300 2251
32-025 Class 20
32-175 Crab
also remove tender coupling bar which as a locking bar
32-500 Cl 5 4-6-0
Also remove screw thought speedo crank
Four screws around fuel/water tank moulding
32-325 Cl 25
32-400 Cl 25
32-425 Cl 24
Screw at rear of baseplate
31-400 Nelson
31-700 B1
31-775 Modified Hall
31-850 J39
Two screws, one screw through each coupling
31-050 J72
31-335 Cl 04
31-350 Cl 03
31-900 Pannier
Screw at rear of baseplate beneath rear pony
31-550 V2
31-600 V1/V3
One by each buffer, two beside fuel / water tank
32-775 Cl 37/0
32-375 Cl 37/4
Two screws beneath chassis, one each end
31-025 Cl 166
31-500 Cl 158
31-950 A4
32-450 Turbostar
32-600 Voyager
32-625 Super Voyager
32-550 A1
Also remove lubricator rod from motion bracket
Two screws, one beneath each coupling pocket
32-075 56xx
32-125 45xx
32-200 Pannier
32-225 Jinty
Small screw beneath cab end coupling pocket
Also the clip at the cab end and beware of the wire 'conduit' at the nose end that attaches to the steps
32-100 Cl 08
Two screws at rear of baseplate
31-450 Ivatt tank
Bodyshell clips on
31-075 Peak
Off centre screws on centre moulding.
DO NOT REMOVE THOSE ON CENTRE LINE!
32-050 Warship
Two screws, one beside each bogie
DO NOT REMOVE THE SCREWS AT THE NOSE ENDS
32-650 Cl 44
32-675 Cl 45
32-700 Cl 46
Five screws - at front of baseplate, two high up by slidebars and two at rear.
32-350 Cl 4 2-6-4T
Also remove screw thought speedo crank
Four screws around fuel tank. Clips at outer end
32-725 Cl 66
Front, middle, and rear screws beneath baseplate
Also remove handrails from cabside
32-250 WD
One screw by each buffer, one screw on each corner of water tank area
32-475 Cl 40
One screw by each buffer, two screws beside fuel / water tank moulding
32-525 Deltic